JMS Daytona CD-1 Full Race Ignition System - Engine Builder Magazine

JMS Daytona CD-1 Full Race Ignition System

This system optimizes the potential of distributor and crank trigger-based ignition systems on all 4, 6 and 8-cylinder engines.

The JMS Daytona CD-1 capacitive discharge system and companion coil are engineered to optimize the potential of distributor and crank trigger-based ignition systems on all 4, 6 and 8-cylinder engines. This system is ideally suited to virtually all motorsports venues (including drag, oval track, off-road, drifting, and pulling) as well as high performance street use.

In addition to boosting performance, the JMS Daytona controller can be programmed to handle functions that include 3-step rpm limits, high gear or nitrous retard, and employ a user-configured timing curve based on boost or rpm. Outputs can be programmed as an rpm window switch for nitrous or a shift light.

This powerful unit delivers 135 mJ (millijoules) of spark energy and has an adjustable rev limiter that goes to 10,900 rpm in 100 rpm increments. Designed and assembled in the USA by JMS Daytona, it features fully encapsulated construction to provide total reliability under the most demanding conditions.

For more information: www.JMSchip.com or call 601-766-9424.

You May Also Like

Peterson Fluid Systems’ 5-Gallon Fat Boy Oil Tank for Dirt Late Model

With a lower profile design and all the standard features of its race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity.

Peterson oil tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of its race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity.

Additionally, 10.5” tank straps with mounting brackets are available. Part number 08-2106 includes two 10.5” straps with mounts for 1.5” chassis bars or 08-2105 includes two 10.5” straps with panel mount. Produced in Peterson’s Longmont, CO machine shop.

Lokar Cable Mounting Bracket for Sniper 2

The new Sniper 2 brackets are precision machined from aluminum and are designed to accommodate Lokar control cables exclusively.

Lokar mounting bracket
Silv-O-Lite Hypereutectic Pistons

The pistons use an aluminum alloy containing 15%-16% silicon, making them stronger than standard cast pistons.

Silv o lite pistons
Stef’s Performance Products’ 3-Gallon Truck Pull Dry Sump Tank

Stef’s Performance Products’ 3-gallon truck pull aluminum dry sump tank features a 9″ diameter, 19″ overall height, a two-piece design.

dry sump tank
AMSOIL 5W-40 Synthetic Metric Motorcycle Oil

AMSOIL 5W-40 synthetic metric motorcycle oil is designed to excel in all areas unique to metric motorcycles, including high engine rpm, wet-clutch lubrication and extreme-pressure regions of gears.

AMSOIL motorcycle oil

Other Posts

Jomar 3-Piece Adjustable Pushrod Guide Plate Kits

Jomar’s kits are available for 5/16” or 3/8” pushrods, and for small block Ford and Chevrolet.

Jomar
Fluidampr Toyota 2JZ Damper

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long-term durability and optimum power.

Fluidampr Toyota 2JZ damper
AMSOIL Marine Engine Oil Now in Gallons

This new package size offers added convenience for owners of boats with larger sumps.

AMSOIL marine oil
Holley Terminator X Max EFI Kit for Godzilla Engines

This Terminator X Max EFI kit for Godzilla engines is latest in Holley’s growing portfolio of engine swap solutions.

Holley Terminator EFI