JMS Daytona CD-1 Full Race Ignition System - Engine Builder Magazine

JMS Daytona CD-1 Full Race Ignition System

This system optimizes the potential of distributor and crank trigger-based ignition systems on all 4, 6 and 8-cylinder engines.

The JMS Daytona CD-1 capacitive discharge system and companion coil are engineered to optimize the potential of distributor and crank trigger-based ignition systems on all 4, 6 and 8-cylinder engines. This system is ideally suited to virtually all motorsports venues (including drag, oval track, off-road, drifting, and pulling) as well as high performance street use.

In addition to boosting performance, the JMS Daytona controller can be programmed to handle functions that include 3-step rpm limits, high gear or nitrous retard, and employ a user-configured timing curve based on boost or rpm. Outputs can be programmed as an rpm window switch for nitrous or a shift light.

This powerful unit delivers 135 mJ (millijoules) of spark energy and has an adjustable rev limiter that goes to 10,900 rpm in 100 rpm increments. Designed and assembled in the USA by JMS Daytona, it features fully encapsulated construction to provide total reliability under the most demanding conditions.

For more information: www.JMSchip.com or call 601-766-9424.

You May Also Like

World Products’ Sportsman II 23-Degree SBC Cylinder Head

This true high-performance cast-iron cylinder head has been continuously improved since its introduction over 20 years ago.

World SBC Sportsman II head

World Products’ Sportsman II 23-degree small block Chevy iron cylinder head is an aftermarket performance cylinder head, good for 30-70 horsepower over stock, and is 50-state emissions legal.

The head features 200cc intake and 69cc exhaust ports. This true high-performance cast-iron cylinder head has been continuously improved since its introduction over 20 years ago.

CTech Econo4 Trailer Cabinet Package

Made of durable, lightweight aluminum, without unnecessary back, top, and floor panels, this package is light enough for the trailer.

CTech cabinets
FuelTech’s FT700 ECU Founders Edition

Be among the first to take advantage of the FT700 Founders Edition’s extensive new and upgraded features.

FuelTech FT700
Peterson Fluid Systems’ 5-Gallon Fat Boy Oil Tank for Dirt Late Model

With a lower profile design and all the standard features of its race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity.

Peterson oil tank
Lokar Cable Mounting Bracket for Sniper 2

The new Sniper 2 brackets are precision machined from aluminum and are designed to accommodate Lokar control cables exclusively.

Lokar mounting bracket

Other Posts

Silv-O-Lite Hypereutectic Pistons

The pistons use an aluminum alloy containing 15%-16% silicon, making them stronger than standard cast pistons.

Silv o lite pistons
Stef’s Performance Products’ 3-Gallon Truck Pull Dry Sump Tank

Stef’s Performance Products’ 3-gallon truck pull aluminum dry sump tank features a 9″ diameter, 19″ overall height, a two-piece design.

dry sump tank
AMSOIL 5W-40 Synthetic Metric Motorcycle Oil

AMSOIL 5W-40 synthetic metric motorcycle oil is designed to excel in all areas unique to metric motorcycles, including high engine rpm, wet-clutch lubrication and extreme-pressure regions of gears.

AMSOIL motorcycle oil
Jomar 3-Piece Adjustable Pushrod Guide Plate Kits

Jomar’s kits are available for 5/16” or 3/8” pushrods, and for small block Ford and Chevrolet.

Jomar